Stainless Steel Wire Mesh

AnPing JinShangLian Metals & Wire Mesh Co.,Ltd has specialized in the production and export of stainless steel wire mesh. We manufacture the satisfied quality and the complete range of stainless steel wire mesh, including stainless square mesh and stainless steel wire mesh Dutch weave.  

Stainless steel is wear-resisting,heat-resisting,acid-resisting and corrosion resisting.Just because of these characteristics,the wire mesh made of stainless steel is extensively used in mining, chemical industry, food industry and pharmaceutical industry.

Our Stainless Steel Wire Mesh products are generally made of stainless steel Type 304, Type 304L, Type 316 and Type 316L.We produce wire cloth in all kinds of forms. The weaving is determined according to our customers, specific requirements, such as the material, the wire diameter, the size of the mesh, width and length.

• Plain weave
• Twill weave
• Dutch weave

Plain weave

Plain weave: This is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.

Mesh Wire Dia. (MM) Opening(MM) Material (AISI) 7 1.00 2.63 304 or 316 10 0.60 1.94 304 or 316 12 0.50 1.62 304 or 316 16 0.40 1.19 304 or 316 16 0.35 1.24 304 or 316 18 0.35 1.06 304 or 316 20 0.40 0.87 304 or 316 24 0.26 0.80 304 or 316 30 0.30 0.55 304 or 316 35 0.17 0.56 304 or 316 40 0.23 0.40 304 or 316 50 0.20 0.31 304 or 316 60 0.15 0.27 304 or 316 70 0.12 0.24 304 or 316 80 0.13 0.19 304 or 316 90 0.12 0.16 304 or 316 100 0.10 0.15 304 or 316 120 0.09 0.12 304 or 316 150 0.063 0.11 304 or 316 180 0.053 0.09 304 or 316 200 0.053 0.07 304 or 316 220 0.05 0.065 304 or 316 250 0.04 0.062 304 or 316 270 0.035 0.06 304 or 316 Twill weave Twill weave: Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.We can supply the mesh from 30 mesh to 500 mesh. The specifications listed below are commonly required. Mesh Wire Dia.(MM) Opening (MM) Material (AISI) 250 0.040 0.063 316 300 0.040 0.044 316 325 0.035 0.043 316L 350 0.030 0.042 316L 400 0.030 0.033 316L 450 0.028 0.028 316L 500 0.025 0.026 316L