Hexagonal Wire Netting 

Hexagonal Wire Netting (Chicken/Rabbit/Poultry Wire) is made of low carbon Iron Wire, the mesh is firm in structure and has flat surface. It is extensively used in INDUSTRIAL AND AGRICULTURAL CONSTRUCTUONS AS REINFORCEMNET AND FENCING. It is also used as Fence for Poultry Cage, Fishing, Garden and Children playground, etc.

Galvanized Hex. Wire Netting	PVC Coated Hex. Wire Netting
Stainless Steel Hex. Wire Netting	Galvanized Hex. Wire Netting

Assortments Available:

• Electro Galvanized before Weaving
• Electro Galvanized After Weaving
• Hot Dipped Galvanized before Weaving
• Hot Dipped Galvanized after Weaving
• PVC Coated Before or After Weaving
• Stainless Steel Wire
• Galvanized Drawn Iron Wire

  Galvanized hexagonal wire netting
  mesh			Min. Gal.v. G/SQ.M	Width	Wire Gauge (Diameter) BWG
  Inch	mm	Tolerance(mm)
  3/8"	10mm	±1.0	0.7mm - 145	2' - 1M	27, 26, 25, 24, 23
  1/2"	13mm	±1.5	0.7mm - 95	2' - 2M	25, 24, 23, 22, 21
  5/8"	16mm	±2.0	0.7mm - 70	2' - 2M	27, 26, 25, 24, 23, 22
  3/4"	20mm	±3.0	0.7mm - 55	2' - 2M	25, 24, 23, 22, 21, 20, 19
  1"	25mm	±3.0	0.9mm - 55	1' - 2M	25, 24, 23, 22, 21, 20, 19, 18
  1-1/4"	31mm	±4.0	0.9mm - 40	1' - 2M	23, 22, 21, 20, 19, 18
  1-1/2"	40mm	±5.0	1.0mm - 45	1' - 2M	23, 22, 21, 20, 19, 18
  2"	50mm	±6.0	1.2mm - 40	1' - 2M	23, 22, 21, 20, 19, 18
  2-1/2"	65mm	±7.0	1.0mm - 30	1' - 2M	21, 20, 19, 18
  3"	75mm	±8.0	1.4mm - 30	2' - 2M	20, 19, 18, 17
  4"	100mm	±8.0	1.6mm - 30	2' - 2M	19, 18, 17, 16

  
  Note:
  1.) The above tolerance comply with standard EN10223-2:1997;

  2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.

  PVC Coated Hexagonal Wire Netting
  Mesh		Wire Gauge (MM)	Width
  Inch	MM	-	-
  1/2"	13mm	0.6mm - 1.0mm	2' - 2M
  3/4"	19mm	0.6mm - 1.0mm	2' - 2M
  1"	25mm	0.7mm - 1.3mm	1' - 2M
  1-1/4"	30mm	0.85mm - 1.3mm	1' - 2M
  1-1/2"	40mm	0.85mm - 1.4mm	1' - 2M
  2"	50mm	1.0mm - 1.4mm	1' - 2M
  Five Star also offer other specifications you need

  
  Note: The thickness of PVC Coating is usually 0.2-0.4mm, others may arranged as per buyers' request;
  Package: Normally each roll packed in water proof paper, then in termo foil (Shrinked Plastic);